Wide view across Haleakalā Crater and its cinder cones from Pōhaku Pālaha
Photo: National Park Service, Public domain, via Wikimedia Commons

If you have one big day for Haleakalā, this is the hike. You descend the Sliding Sands Trail from near the summit, cross the colorful crater floor past cinder cones, and climb out the Halemauʻu switchbacks. Because you start higher than you finish, you see the best of both trails without hiking either one twice.

The logistics: two trailheads

This is a point-to-point hike, and the two trailheads are several miles apart by road. The standard plan:

  1. Park at the Halemauʻu trailhead (about mile 14 on Route 378).
  2. Get to the Sliding Sands trailhead at the Haleakalā Visitor Center by a second car or a drop-off from a friend.
  3. Hike back to your car.

Ending at your car matters: after 11 miles, the last thing you want is a long uphill walk on the highway shoulder.

The route

Down Sliding Sands

The first miles drop through red and black cinder with huge views. Around the 2-mile mark, a spur leads toward the Kaluʻuoka ʻŌʻō cinder cone. Read the Sliding Sands guide for details.

Across the crater floor

At the bottom you cut across the valley floor on connector trails toward Hōlua. You will pass cinder cones, lava flows and colorful cinder fields such as the area often called Pele's Paint Pot. Watch for ʻāhinahina (silverswords) and nēnē, and stay on the trail.

Up Halemauʻu

After Hōlua Cabin, you climb the switchbacks up the crater wall. This is the hardest part of the day, so leave energy and water for it. The trail then crosses shrubland back to the parking lot. See our Halemauʻu guide.

Timing and water

  • Plan 6 to 8 hours for most fit hikers, more with long breaks.
  • Start by mid-morning at the latest. Clouds and rain often arrive in the afternoon, especially on the Halemauʻu side.
  • Carry at least 3 liters of water per person. Do not count on finding drinkable water on the route.
  • Bring a real lunch, salty snacks, sun protection, a warm layer and a rain shell.

Who should do it

This hike is for fit hikers who are comfortable with a long day at altitude. If anyone in your group feels altitude symptoms on the way down, it is far easier to turn back early on Sliding Sands than to push on. Read our altitude guide before you go.

Make it an overnight

Split the traverse over two days by reserving Hōlua or Kapalaoa Cabin, or a tent site. See cabins and crater camping.

Want a guide for this hike?

Only six companies are authorized by the National Park Service to guide hikes in Haleakalā. See the authorized guides or browse all permitted tour operators.

Frequently asked questions

How long is the Sliding Sands to Halemauʻu hike?

About 11 miles one way, depending on the connector route you take across the crater floor. Most fit hikers take 6 to 8 hours.

How do you get back to your car after the Haleakalā traverse?

Park at the Halemauʻu trailhead and get to the Sliding Sands trailhead by a second car or a drop-off, so you finish at your car.

Which direction should I hike the Haleakalā crater traverse?

Start at Sliding Sands near the summit and finish at Halemauʻu. You start higher than you finish, so there is less total climbing.